Cuscinetto a rulli conici FAG 33110, Diametro esterno: 85 mm | Diametro interno: 50 mm | Larghezza: 26 mm
Cuscinetto a rulli conici
Vedi informazioni tecnicheVedi documentiRiferimenti
FAG:33110
Rubix:160000000375915
Produttore:0167137290000
EAN:4012801040884
Riepilogo info tecniche
| Diametro interno | 50 mm |
|---|---|
| Diametro esterno | 85 mm |
| Larghezza | 26 mm |
Documenti
Dettagli del prodotto : 0167137290000-CUSCINETTO A RULLI CONICI 33110
Cuscinetto a rulli conici 331, dimensioni conformi a DIN ISO 355/DIN 720, smontabile, accoppiato o accoppiabile
Punti di forza
•High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Informazioni tecniche
Attributi
| Dimensioni logistiche (Prof. x Largh. x Alt.) | 26x85x85 mm |
|---|---|
| Peso | 590 g |
| Diametro interno | 50 mm |
| Diametro esterno | 85 mm |
| Larghezza | 26 mm |
| Gioco dei cuscinetti | cn |
| Serie | 331 |
| Regime di riferimento | 4600 rpm |
| Regime limite | 8200 rpm |
| Larghezza totale del cuscinetto | 26 mm |
| Norma | iso 355;din 720;iso 10317 |
| Carico statico di base, radiale - C0r | 122000 N |
| Carico dinamico di base, radiale - Cr | 86000 N |
| Codice doganale | 84822000 |
Mostra UNSPSC / ECL@SS
- Esaurito